J. Rockett Audio Designs Rockaway Archer Overdrive/EQ Pedal

Rockaway Archer features:

Six band graphic EQ
Volume and gain knobs
I/O jacks at the head of the pedal
9V DC operation with standard – tip and + sleeve
Approximately 4” x 2.50” in size
The settings include Up to 18dB of cut or boost at 6 different frequencies. Each frequency is increased by pushing its corresponding slider up on the pedal or decreased by pushing them down. This also adds or decreases volume. It is a great way to hit the front end of an amp harder than a stock Archer. The Rockaway Archer has an incredible variety of sounds due to the multitude of ways the EQ section can be used!

Dimensions: 4.00″ x 2.50″

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

True Bypass

30mA Current Draw

18dB of cut and boost per frequency

6 Band Graphic EQ

Band 1 – 100 Hz Far Left
Band 2 – 200 Hz
Band 3 – 400 Hz
Band 4 – 800 Hz
Band 5 – 1.6K
Band 6 – 3.2K Far Right

Internal 18v Charge Pump (DO NOT USE 18v POWER SUPPLY, ONLY USE NEGATIVE TIP 9v AS LABELED ON THE FACE OF THE PEDAL)